CUSTOMER PORTAL

Solidium MR/NAF And Medical Cabinets

Moisture And Environmental Protection

Solidium ULTRA Cabinet Doors

OPTIMUM MACHINABILITY

Solidium ULTRA MDF is the premiere choice for the most demanding multi-level machining and routing applications ... more


Engineered to be tough on moisture and friendlier to the environment with no added formaldehyde, Solidium MR/NAF from Del-Tin Fiber offers a perfect balance of the premium MDF performance your application demands – and the protection your green-sensitive project needs. Solidium MR/NAF is an interior panel able to resist periodic moisture exposure while maintaining dimensional stability and reduced thickness swell 30-50% better than untreated MDF panels. And with formaldehyde emission levels more than 3 times lower than CARB Phase 2 standards, Solidium MR/NAF is a smart choice for cabinets, fixtures, and decorative applications in homes, schools, hospitals and other projects in which improved indoor air quality and green building credits are a priority. Solidium MR/NAF delivers the best of both worlds to help you create ideal environments, year after year.

Physical Properties

GENERAL DIMENSIONS
Usage: Interior use only Thicknesses: 3/16" - 1"
Raw Material: Southern Pine fiber Widths: To five feet
Lengths: To sixteen feet
PERFORMANCE VALUES
PROPERTY THICKNESS RANGE
Minimum Panel Averages <3/8" >3/8" to <1/2" 1/2" to 3/4" >3/4"
IB - Internal Bond (psi) 110 100 90 85
MOR - Modulus of Rupture (psi) 4,050 4,050 4,050 4,050
MOE - Modulus of Elasticity (ppsi) 405 405 405 405
Face Screw Hold (lbs) NA NA 270 270
Edge Screw Hold (lbs) NA NA 250 250
Thickness Swell (max) .044" 10% 7% 4%
TOLERANCES
Length & Width: (for each panel) ± 1/16"
Squareness: (per 1 ft. of length) ± 1/64"
Straightness: (per 2 ft. of length) ± 1/64"
Thickness: (within panel) ± 0.005"
Thickness: (panel to panel) ± 0.005"

Environmental

EMISSIONS

The Composite Panel Association (CPA) has certified the El Dorado, Arkansas, manufacturing facility of Del-Tin Fiber, LLC to be in compliance with the requirements of CPA ECC 4-11 for Eco-Certified Composites and the California Air Resources Board (CARB) Airborne Toxic Control Measure 93120.

Solidium MR/NAF is made using no-added formaldehyde based resins and exceeds the standards for CARB Phase 2 compliance. Our El Dorado facility is approved for NAF exemption N-13-082.

ECC CERTIFICATION STANDARD

In addition, the Composite Panel Association has certified that Del-Tin Fiber, LLC has fulfilled the requirements of CPA ECC 4-11 for Eco-Certified Composites by demonstrating compliance to these four environmental criteria.

  1. Carbon Footprint – requires each panel to demonstrate net carbon storage
  2. Local and Renewable Resource – requires high percentage use of local fiber
  3. Recycled/Recovered – requires high percentage use of recycled/recovered fiber
  4. Sustainability – requires low percentage of fiber furnish to enter waste stream

Review greater detail of the ECC standard and a link to the Del-Tin Fiber, LLC certificate on our ECC certification page.

ENVIRONMENTAL CREDITS

Solidium MR/NAF can also contribute toward credits in popular environmental certification programs such as LEED, Green Globes, NAHB and CARB. Visit our green contributions page for more information.

manufacturer of Solidium MDF